VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
7.1. Coupling
7.2. A transmission
7.3. Kardannaja transfer
7.4. The back bridge
7.4.1. Features of the device
7.4.2. Removal and installation of the back bridge
7.4.3. Dismantling and assemblage of the back bridge
7.4.4. Check of a beam of the back bridge
7.4.5. Editing of a beam of the back bridge
7.4.6. Semiaxes
7.4.7. A reducer
7.4.7.1. Definition of malfunctions of a reducer on noise
7.4.7.2. Reducer removal
7.4.7.3. Reducer installation
7.4.7.4. Reducer dismantling
7.4.7.5. Check of a technical condition of details of a reducer
7.4.7.6. Reducer assemblage
7.4.8. Differential assemblage
7.4.9. Installation and adjustment of a leading gear wheel
7.4.10. Adjustment of bearings of a leading gear wheel
7.4.11. Installation of a box of differential
7.4.12. A tightness of bearings of a box of differential and adjustment of a lateral backlash
7.4.13. Check of contact of teeths of gear wheels of the main transfer
7.4.14. Replacement of an epiploon of a leading gear wheel
7.4.15. Possible malfunctions of the back bridge
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386




7-4-7-4-razborka-reduktora.html

7.4.7.4. Reducer dismantling

Removal of an internal ring of the back bearing of a leading gear wheel by universal stripper А.40005/1/7

1 – universal stripper А.40005/1/7;

2 – a leading gear wheel;

3 – an internal ring of the bearing;

4 – adaptation A.45008

Removal of an internal ring of the bearing of a box of differential by universal stripper А.40005/1/6

1 – universal stripper А.40005/1/6;

2 – an internal ring of the bearing;

3 – a differential box;

4 – emphasis А.45028

PERFORMANCE ORDER
1. Fix a reducer at the stand. Remove lock plates 9 (fig. the Reducer of the back bridge in gathering see), turn out bolts and remove covers of bearings of a box of differential, adjusting nuts and external rings of roller bearings. Covers and external rings of bearings before removal mark, that at assemblage to establish on former places.
2. Take out from картера a reducer a differential box together with a conducted gear wheel and internal rings of bearings.
Removal of a leading gear wheel and its details
3. Turn картер a reducer a mouth upwards and, holding with a stopper 1 flange 3 leading gear wheels, turn on a key 2 nut of fastening of a flange (4 – an arm for reducer fastening at the stand).
4. Remove a flange and take out a leading gear wheel with an adjusting ring, an internal ring of the back bearing and with распорной the plug.
5. From картера a reducer take out an epiploon, маслоотражатель and an internal ring of the forward bearing.
6. Выпрессуйте external rings of forward and back bearings оправкой А.70198.
7. Remove from a leading gear wheel распорную the plug and by means of universal stripper А.40005/1/7 and оправки А.45008 (fig. Removal of an internal ring of the back bearing of a leading gear wheel by universal stripper А.40005/1/7 see) remove an internal ring of the back roller bearing.
8. Remove an adjusting ring of a leading gear wheel.
Differential dismantling
9. Remove internal rings 2 (fig. Removal of an internal ring of the bearing of a box of differential by universal stripper А.40005/1/6 see) roller bearings of a box of 3 differentials, using for this purpose universal stripper А.40005/1/6 and emphasis А.45028.
10. Turn away a nut of fastening of a conducted gear wheel and beat out from a box an axis of satellites.
11. Turn gear wheels of semiaxes and satellites so that the last were rolled out in differential windows then they can be taken out.
12. Remove gear wheels of semiaxes with basic washers.

«The previous page
7.4.7.3. Reducer installation
The following page»
7.4.7.5. Check of a technical condition of details of a reducer