VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
7.1. Coupling
7.2. A transmission
7.3. Kardannaja transfer
7.4. The back bridge
7.4.1. Features of the device
7.4.2. Removal and installation of the back bridge
7.4.3. Dismantling and assemblage of the back bridge
7.4.4. Check of a beam of the back bridge
7.4.5. Editing of a beam of the back bridge
7.4.6. Semiaxes
7.4.7. A reducer
7.4.7.1. Definition of malfunctions of a reducer on noise
7.4.7.2. Reducer removal
7.4.7.3. Reducer installation
7.4.7.4. Reducer dismantling
7.4.7.5. Check of a technical condition of details of a reducer
7.4.7.6. Reducer assemblage
7.4.8. Differential assemblage
7.4.9. Installation and adjustment of a leading gear wheel
7.4.10. Adjustment of bearings of a leading gear wheel
7.4.11. Installation of a box of differential
7.4.12. A tightness of bearings of a box of differential and adjustment of a lateral backlash
7.4.13. Check of contact of teeths of gear wheels of the main transfer
7.4.14. Replacement of an epiploon of a leading gear wheel
7.4.15. Possible malfunctions of the back bridge
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386







7-4-7-6-sborka-reduktora.html

7.4.7.6. Reducer assemblage

Details of a reducer of the back bridge

1 – a flange of a leading gear wheel;
2 – an epiploon;
3 – маслоотражатель;
4 – the forward bearing;
5 – the back bearing;
6 – an adjusting ring of a leading gear wheel;
7 – a basic washer of a gear wheel of a semiaxis;
8 – a semiaxis gear wheel;
9 – the satellite;
10 – an axis of satellites;
11 – a conducted gear wheel;
12 – a differential box;
13 – the bearing of a box of differential;
14 – an adjusting nut;
15 – a bolt of fastening of a lock plate;
16 – a lock plate;
17 – a lock plate;
18 – a bolt of fastening of a conducted gear wheel;
19 – a leading gear wheel;
20 – a bolt of fastening of a cover;
21 – a spring washer;
22 – a lining;
23 – a bolt of fastening of a reducer to a beam of the back bridge;
24 – картер a reducer;
25 – распорная the plug;
26 – a flat washer;
27 – a nut of fastening of a flange of a leading gear wheel

Reliable work of a reducer is provided with strict observance of mentioned below receptions on assemblage and its adjustment (subsection 7.4.8, subsection 7.4.9, subsection 7.4.10, subsection 7.4.11, subsection 7.4.12 and subsection 7.4.13 see).
«The previous page
7.4.7.5. Check of a technical condition of details of a reducer
The following page»
7.4.8. Differential assemblage