VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
7.1. Coupling
7.2. A transmission
7.3. Kardannaja transfer
7.4. The back bridge
7.4.1. Features of the device
7.4.2. Removal and installation of the back bridge
7.4.3. Dismantling and assemblage of the back bridge
7.4.4. Check of a beam of the back bridge
7.4.5. Editing of a beam of the back bridge
7.4.6. Semiaxes Removal and installation Check of a technical condition Removal запорного rings Semiaxis assemblage Gauging of an axial free wheeling of a semiaxis on the car
7.4.7. A reducer
7.4.8. Differential assemblage
7.4.9. Installation and adjustment of a leading gear wheel
7.4.10. Adjustment of bearings of a leading gear wheel
7.4.11. Installation of a box of differential
7.4.12. A tightness of bearings of a box of differential and adjustment of a lateral backlash
7.4.13. Check of contact of teeths of gear wheels of the main transfer
7.4.14. Replacement of an epiploon of a leading gear wheel
7.4.15. Possible malfunctions of the back bridge
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices



7.4.6. Semiaxes

1. Remove a wheel and a brake drum.
2. Having turned away a nut of fastening of a board of a brake to a bridge beam, a stripper 67.7801.9516, holding a brake board, take полуось together with маслоотражателем, a plate of fastening of the bearing and запорным a bearing ring.
3. In need of replacement, take out an epiploon from a beam flange.
4. Semiaxis installation spend to sequences, return to removal, being careful.

«The previous page
7.4.5. Editing of a beam of the back bridge
The following page» Removal and installation