
VAZ 2101, 2102
	1. Specifications
	2. Operation and service
	3. The engine
	4. Fuel system
	5. Ignition system
	6. Start and gymnastics system
	7. Transmission
		7.1. Coupling
		7.2. A transmission
		7.3. Kardannaja transfer
		7.4. The back bridge
			7.4.1. Features of the device
			7.4.2. Removal and installation of the back bridge
			7.4.3. Dismantling and assemblage of the back bridge
			7.4.4. Check of a beam of the back bridge
			7.4.5. Editing of a beam of the back bridge
			7.4.6. Semiaxes
			7.4.7. A reducer
			7.4.8. Differential assemblage
			7.4.9. Installation and adjustment of a leading gear wheel
			7.4.10. Adjustment of bearings of a leading gear wheel
			7.4.11. Installation of a box of differential
			7.4.12. A tightness of bearings of a box of differential and adjustment of a lateral backlash
			7.4.13. Check of contact of teeths of gear wheels of the main transfer
			7.4.14. Replacement of an epiploon of a leading gear wheel
			7.4.15. Possible malfunctions of the back bridge
	8. A running gear
	9. A steering
	10. Brake system
	11. An electric equipment
	12. A body
	13. Features of repair
	14. Appendices

7-4-2-snyatie-i-ustanovka-zadnego-mosta.html

7.4.2. Removal and installation of the back bridge

Removal and installation of a beam of the back bridge are described in subsection 8.2.2.

For removal of the back bridge, it is enough to disconnect bars of a suspension bracket and shock-absorbers only from a beam of the back bridge.

At installation of the back bridge of a nut of bolts of fastening of bars tighten, according to instructions in subsection 8.2.2.

After installation pump over brake system and adjust working and lay brake systems, as directed subsection 10.2.3, subsection 10.2.6.

Through маслоналивное an aperture fill with oil the back bridge.

«The previous page
7.4.1. Features of the device

The following page»
7.4.3. Dismantling and assemblage of the back bridge