VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
7.1. Coupling
7.2. A transmission
7.3. Kardannaja transfer
7.4. The back bridge
7.4.1. Features of the device
7.4.2. Removal and installation of the back bridge
7.4.3. Dismantling and assemblage of the back bridge
7.4.4. Check of a beam of the back bridge
7.4.5. Editing of a beam of the back bridge
7.4.6. Semiaxes
7.4.7. A reducer
7.4.8. Differential assemblage
7.4.9. Installation and adjustment of a leading gear wheel
7.4.10. Adjustment of bearings of a leading gear wheel
7.4.11. Installation of a box of differential
7.4.12. A tightness of bearings of a box of differential and adjustment of a lateral backlash
7.4.13. Check of contact of teeths of gear wheels of the main transfer
7.4.14. Replacement of an epiploon of a leading gear wheel
7.4.15. Possible malfunctions of the back bridge
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices



7.4.8. Differential assemblage

1. Grease трансмиссионным with oil and establish, through windows in a box of differential, a gear wheel of semiaxes with basic washers and satellites. Turn satellites and gear wheels of semiaxes so that to combine an axis of rotation of satellites with an aperture axis in a box, then insert an axis of satellites.
2. Check up an axial backlash of each gear wheel of a semiaxis: it should make 0–0,10 mm, and the moment of resistance to rotation of gear wheels of differential should not exceed
14,7 Н·м (1,5 кгс·м).
3. Fix a conducted gear wheel on a differential box.
4. Оправкой А.70152 напрессуйте on a differential box internal rings of roller bearings.

«The previous page Reducer assemblage
The following page»
7.4.9. Installation and adjustment of a leading gear wheel