VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
7.1. Coupling
7.2. A transmission
7.3. Kardannaja transfer
7.4. The back bridge
7.4.1. Features of the device
7.4.2. Removal and installation of the back bridge
7.4.3. Dismantling and assemblage of the back bridge
7.4.4. Check of a beam of the back bridge
7.4.5. Editing of a beam of the back bridge
7.4.6. Semiaxes
7.4.7. A reducer
7.4.7.1. Definition of malfunctions of a reducer on noise
7.4.7.2. Reducer removal
7.4.7.3. Reducer installation
7.4.7.4. Reducer dismantling
7.4.7.5. Check of a technical condition of details of a reducer
7.4.7.6. Reducer assemblage
7.4.8. Differential assemblage
7.4.9. Installation and adjustment of a leading gear wheel
7.4.10. Adjustment of bearings of a leading gear wheel
7.4.11. Installation of a box of differential
7.4.12. A tightness of bearings of a box of differential and adjustment of a lateral backlash
7.4.13. Check of contact of teeths of gear wheels of the main transfer
7.4.14. Replacement of an epiploon of a leading gear wheel
7.4.15. Possible malfunctions of the back bridge
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386




7-4-7-2-snyatie-reduktora.html

7.4.7.2. Reducer removal

PERFORMANCE ORDER
1. Merge oil from a bridge beam.
2. Having raised a back part of the car, establish it on supports and remove wheels.
3. Turn away a nut of fastening of a board of a brake to a beam and выдвините semiaxes so that they left a differential box.
4. Disconnect карданный a shaft from a reducer, put a support under картер a reducer, turn out bolts of its fastening to a beam of the back bridge and take out a reducer from a beam, without damaging a lining.

«The previous page
7.4.7.1. Definition of malfunctions of a reducer on noise
The following page»
7.4.7.3. Reducer installation