VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
7.1. Coupling
7.1.1. Features of the device
7.1.2. Adjustment of a drive of deenergizing of coupling
7.1.3. Prorolling of a hydrodrive of coupling
7.1.4. Removal and coupling installation
7.1.5. The coupling control
7.1.6. Removal and installation of the worker and the main thing of cylinders of a drive of coupling
7.1.7. Dismantling, the control, repair and assemblage of the main thing and the worker of cylinders
7.1.8. Check of the main cylinder of a drive of coupling at the stand
7.1.9. Possible malfunctions of coupling, their reason and elimination methods
7.2. A transmission
7.3. Kardannaja transfer
7.4. The back bridge
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386







7-1-5-kontrol-scepleniya.html

7.1.5. The coupling control

The coupling control

1 – a persistent flange of a press spring;
2 – press диафрагменная a spring;
3 – press a disk;
4 – a ring

Replacement of frictional overlays of a conducted disk

1 – оправка 67.7851.9500;

2 – a conducted disk;

3 – the conductor 67.7822.9517

Editing of a conducted disk of coupling


The control is spent on the basis which simulates a flywheel of the engine and has a metal intermediate ring in 4 thickness of 8,2 mm, replacing a conducted disk (fig. the coupling Control see). Having fixed a coupling casing, execute four courses of deenergizing, putting loading no more than 1372 Н (140 кгс) on a persistent flange of a press spring. To a course of deenergizing of 8 mm there should correspond moving of a press disk on 1,6–1,7 mm (the least admissible – 1,4 mm).

The distance from the basis to a working surface of a frictional ring of a persistent flange should be 40–43 mm. In the course of work, at the expense of deterioration of rubbing surfaces of disks of coupling, this size increases. If it reaches 48 mm or moving of a press disk there will be less than 1,4 mm, a coupling casing in gathering with a press disk replace.

Frictional overlays of a conducted disk replace at occurrence растрескиваний, distance reduction between a rivet and a working surface to 0,2 mm, and also at unilateral teases. At repair of a conducted disk and replacement of frictional overlays use оправкой 67.7851.9500, the conductor 67.7822.9517 (fig. Replacement of frictional overlays of a conducted disk see) and equipment 67.7813.9503. Razvaltsovannye rivets should not have ruptures. Palpation of a working surface of frictional overlays should not exceed 0,5 mm. If it is more, a disk correct (fig. Editing of a conducted disk of coupling) see or replace new. At occurrence on a conducted disk or springs демпфера cracks, replace a conducted disk in gathering.
«The previous page
7.1.4. Removal and coupling installation
The following page»
7.1.6. Removal and installation of the worker and the main thing of cylinders of a drive of coupling