VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
7.1. Coupling
7.1.1. Features of the device
7.1.2. Adjustment of a drive of deenergizing of coupling
7.1.3. Prorolling of a hydrodrive of coupling
7.1.4. Removal and coupling installation
7.1.5. The coupling control
7.1.6. Removal and installation of the worker and the main thing of cylinders of a drive of coupling
7.1.7. Dismantling, the control, repair and assemblage of the main thing and the worker of cylinders
7.1.8. Check of the main cylinder of a drive of coupling at the stand
7.1.9. Possible malfunctions of coupling, their reason and elimination methods
7.2. A transmission
7.3. Kardannaja transfer
7.4. The back bridge
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386




7-1-6-snyatie-i-ustanovka-rabochego-i-glavnogo-cilindrov-privoda-scepleniya.html

7.1.6. Removal and installation of the worker and the main thing of cylinders of a drive of coupling

PERFORMANCE ORDER
1. First of all merge a working liquid. For this purpose, one end of a hose put on the union of release of air 9 working cylinders (fig. the Working cylinder and a plug of deenergizing of coupling see), and another lower in a pure vessel, turn away the union 9 on 1/2–3/4 turns and press a pedal until the liquid will not be removed from hydraulic system, then disconnect the tubes connecting the main and working cylinders, disconnect оттяжную a spring 7, remove шплинт from the pusher end, and then the working cylinder, having turned away two bolts of fastening.
2. For removal of the main cylinder turn on two nuts with which it fastens on hairpins to an arm of pedals, and disconnect a flexible hose of a tank.
3. For installation of the main thing and the worker of cylinders the above described operations execute upside-down.
4. After refuelling by a working liquid a hydrodrive pump over.

«The previous page
7.1.5. The coupling control
The following page»
7.1.7. Dismantling, the control, repair and assemblage of the main thing and the worker of cylinders