VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
7.1. Coupling
7.1.1. Features of the device
7.1.2. Adjustment of a drive of deenergizing of coupling
7.1.3. Prorolling of a hydrodrive of coupling
7.1.4. Removal and coupling installation
7.1.5. The coupling control
7.1.6. Removal and installation of the worker and the main thing of cylinders of a drive of coupling
7.1.7. Dismantling, the control, repair and assemblage of the main thing and the worker of cylinders
7.1.8. Check of the main cylinder of a drive of coupling at the stand
7.1.9. Possible malfunctions of coupling, their reason and elimination methods
7.2. A transmission
7.3. Kardannaja transfer
7.4. The back bridge
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386




7-1-9-vozmozhnye-neispravnosti-scepleniya-ikh-prichiny-i-metody-ustraneniya.html

7.1.9. Possible malfunctions of coupling, their reason and elimination methods

THE REASON
ELIMINATION METHOD
Incomplete deenergizing of coupling (coupling "conducts")
The increased backlashes in a drive of deenergizing of coupling Adjust a drive of deenergizing of coupling
Коробление a conducted disk (face palpation more than 0,5 mm) Correct a disk or replace new
Roughnesses on surfaces of frictional overlays of a conducted disk Replace overlays or a conducted disk in gathering
Easing of rivets or breakage of frictional overlays of a conducted disk Replace overlays, check up face palpation of a disk
Jamming of a nave of a conducted disk on шлицах a primary shaft of a transmission Clear шлицы, cover with greasing ЛСЦ-15. If шлицы are crumpled or worn out so that it causes jamming – replace a primary shaft or a conducted disk
Breakage of the plates connecting a persistent flange with a casing of coupling Replace a casing of coupling with a press disk in gathering
Air in hydrodrive system Pump over system
Leak of a liquid from hydrodrive system through connections or the damaged pipelines Tighten connections, replace the damaged details, pump over hydrodrive system
Leak of a liquid from the main cylinder or the cylinder of a drive of deenergizing of coupling Replace sealing rings, pump over system
The aperture in a tank cover that has caused depression in the main cylinder and подсос air in the cylinder through consolidations has got littered Clean an aperture in a tank cover, pump over system
Infringement of tightness owing to pollution or deterioration of a forward sealing ring of the main cylinder Clear a sealing ring, at deterioration replace
Easing of rivets of fastening of a press spring Replace a casing of coupling with a press disk in gathering
Warp or коробление a press disk Replace a casing of coupling with a press disk in gathering
Incomplete inclusion of coupling (coupling "slips")
There are no backlashes in a drive of deenergizing of coupling Adjust a drive of deenergizing of coupling
The raised deterioration or burning of frictional overlays of a conducted disk Replace frictional overlays or a conducted disk in gathering
Замасливание frictional overlays of a conducted disk, surfaces of a flywheel and a press disk Carefully wash out uajt-spiritom greasy surfaces, eliminate the reasons замасливания disks
The compensatory aperture of the main cylinder is littered Wash out the cylinder and clean a compensatory aperture
Damage or jamming of a drive of coupling Eliminate the malfunctions causing jamming
Jerks at coupling work
Jamming of a nave of a conducted disk on шлицах a primary shaft Clear шлицы, grease with greasing ЛСЦ-15. If шлицы are crumpled or worn out so that it causes jamming – replace a primary shaft or a conducted disk
Замасливание frictional overlays of a conducted disk, surfaces of a flywheel and a press disk Carefully wash out uajt-spiritom greasy surfaces and eliminate the reason замасливания disks
Jamming in the mechanism of a drive of deenergizing of coupling Replace the deformed details. Eliminate the reasons causing jamming
The raised deterioration of frictional overlays of a conducted disk Replace overlays new, check up, whether there are no damages of a surface of a disk
Easing of rivets of frictional overlays of a conducted disk Replace faulty rivets, and if necessary – overlays
Damage of a surface or коробление a press disk Replace a casing of coupling with a press disk in gathering
The raised noise at coupling deenergizing
Deterioration, damage or leak of greasing from the bearing of deenergizing of coupling Replace the bearing
Deterioration of the forward bearing of a primary shaft of a transmission Replace the bearing
The raised noise at coupling inclusion
Breakage or decrease in elasticity of springs демпфера a conducted disk Replace a conducted disk in gathering
Breakage, decrease in elasticity or соскакивание оттяжной springs of a plug of deenergizing of coupling Replace a casing of coupling with a press disk in gathering

«The previous page
7.1.8. Check of the main cylinder of a drive of coupling at the stand
The following page»
7.2. A transmission