VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
3.1. Features of the device
3.2. Possible malfunctions of the engine, their reason and elimination methods
3.3. Removal and engine installation
3.4. Engine dismantling
3.5. Engine assemblage
3.6. Bench tests of the engine
3.7. Engine check on the car
3.8. The block of cylinders
3.9. Pistons and rods
3.10. A cranked shaft and a flywheel
3.11. A head of cylinders and клапанный the mechanism
3.11.1. Features of the device
3.11.2. Removal and installation on the car
3.11.3. Dismantling and assemblage
3.11.4. Clearing of a head of cylinders
3.11.5. Check and grinding of saddles of valves
3.11.6. Valves
3.11.7. Directing plugs of valves
3.11.8. Maslootrazhatelnye caps of directing plugs
3.11.9. Levers of valves
3.11.10. Springs
3.11.11. A lining of a head of cylinders
3.11.12. Check of tightness of a head of cylinders
3.12. A camshaft and its drive
3.13. Cooling system
3.14. Greasing system
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386




3-11-9-rychagi-klapanov.html

3.11.9. Levers of valves

PERFORMANCE ORDER
1. Check up a condition of working surfaces of the lever interfaced to a core of the valve, with a cam of a camshaft and with the spherical end of an adjusting bolt. If on these surfaces there were teases or risks, replace the lever new.
2. If deformation or other damages on the plug of an adjusting bolt or on the bolt is found out, replace details.

«The previous page
3.11.8. Maslootrazhatelnye caps of directing plugs
The following page»
3.11.10. Springs