
VAZ 2101, 2102
	1. Specifications
	2. Operation and service
	3. The engine
		3.1. Features of the device
		3.2. Possible malfunctions of the engine, their reason and elimination methods
		3.3. Removal and engine installation
		3.4. Engine dismantling
		3.5. Engine assemblage
		3.6. Bench tests of the engine
		3.7. Engine check on the car
		3.8. The block of cylinders
		3.9. Pistons and rods
		3.10. A cranked shaft and a flywheel
		3.11. A head of cylinders and клапанный the mechanism
			3.11.1. Features of the device
			3.11.2. Removal and installation on the car
			3.11.3. Dismantling and assemblage
			3.11.4. Clearing of a head of cylinders
			3.11.5. Check and grinding of saddles of valves
			3.11.6. Valves
			3.11.7. Directing plugs of valves
			3.11.8. Maslootrazhatelnye caps of directing plugs
			3.11.9. Levers of valves
			3.11.10. Springs
			3.11.11. A lining of a head of cylinders
			3.11.12. Check of tightness of a head of cylinders
		3.12. A camshaft and its drive
		3.13. Cooling system
		3.14. Greasing system
	4. Fuel system
	5. Ignition system
	6. Start and gymnastics system
	7. Transmission
	8. A running gear
	9. A steering
	10. Brake system
	11. An electric equipment
	12. A body
	13. Features of repair
	14. Appendices

3-11-4-ochistka-golovki-cilindrov.html

3.11.4. Clearing of a head of cylinders

PERFORMANCE ORDER

1. Establish a head on support А.60353.

2. Remove a deposit from chambers of combustion and from a surface of final channels the metal brush resulted in rotation by an electric drill. Clear and examine inlet channels and channels of a supply of oil to levers of a drive of valves.

«The previous page
3.11.3. Dismantling and assemblage

The following page»
3.11.5. Check and grinding of saddles of valves