VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
3.1. Features of the device
3.2. Possible malfunctions of the engine, their reason and elimination methods
3.3. Removal and engine installation
3.4. Engine dismantling
3.5. Engine assemblage
3.6. Bench tests of the engine
3.7. Engine check on the car
3.8. The block of cylinders
3.9. Pistons and rods
3.10. A cranked shaft and a flywheel
3.11. A head of cylinders and клапанный the mechanism
3.12. A camshaft and its drive
3.13. Cooling system
3.13.1. Features of the device
3.13.2. Check of level and liquid density in cooling system
3.13.3. Refuelling of system of cooling by a liquid
3.13.4. Adjustment of a tension of a belt of a drive of the pump
3.13.5. The pump of a cooling liquid
3.13.6. The thermostat
3.13.7. A radiator
3.14. Greasing system
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386




3-13-4-regulirovka-natyazheniya-remnya-privoda-nasosa.html

3.13.4. Adjustment of a tension of a belt of a drive of the pump

The scheme of check of a tension of a belt of a drive of the pump

The belt tension is checked by a deflection between generator and pump pulleys or between pulleys of the pump and a cranked shaft. At a normal tension of a belt the deflection And under effort 98 Н (10 кгс) should be within 10–15 mm, and a deflection In – within 12–17 mm.

PERFORMANCE ORDER
For increase in a tension of a belt ослабьте nuts of fastening of the generator, displace it from the engine and tighten nuts.

«The previous page
3.13.3. Refuelling of system of cooling by a liquid
The following page»
3.13.5. The pump of a cooling liquid