VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
3.1. Features of the device
3.2. Possible malfunctions of the engine, their reason and elimination methods
3.3. Removal and engine installation
3.4. Engine dismantling
3.5. Engine assemblage
3.6. Bench tests of the engine
3.7. Engine check on the car
3.8. The block of cylinders
3.9. Pistons and rods
3.10. A cranked shaft and a flywheel
3.11. A head of cylinders and клапанный the mechanism
3.12. A camshaft and its drive
3.13. Cooling system
3.13.1. Features of the device
3.13.2. Check of level and liquid density in cooling system
3.13.3. Refuelling of system of cooling by a liquid
3.13.4. Adjustment of a tension of a belt of a drive of the pump
3.13.5. The pump of a cooling liquid
3.13.6. The thermostat
3.13.7. A radiator
3.14. Greasing system
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386




3-13-2-proverka-urovnya-i-plotnosti-zhidkosti-v-sisteme-okhlazhdeniya.html

3.13.2. Check of level and liquid density in cooling system

PERFORMANCE ORDER
1. Correctness of refuelling of system of cooling is checked on liquid level in a broad tank which on the cold engine (at 15–20 °) should be on 3–4 sm above a label «MIN», put on a broad tank.
2. If necessary check up ареометром density of a cooling liquid which should be 1,078–1,085 g/sm3 for a liquid Antifreeze А–40.
3. If liquid level in a tank below norm, and density above norm add the distilled water. If density normal – add a liquid of the same mark, as that which is in cooling system.
4. If liquid density in system of cooling below norm, add a liquid Antifreeze.

«The previous page
3.13.1. Features of the device
The following page»
3.13.3. Refuelling of system of cooling by a liquid