VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
7.1. Coupling
7.2. A transmission
7.3. Kardannaja transfer
7.3.1. Features of the device
7.3.2. Removal and installation
7.3.3. Check of a technical condition without dismantling
7.3.4. Dismantling
7.3.5. Check of a technical condition
7.3.6. Assemblage
7.3.7. Balancing of shaft
7.3.8. Possible malfunctions карданной transfers
7.4. The back bridge
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386 Бетсити - зеркало betcity сайта работающее на сегодня сейчас.





7-3-2-snyatie-i-ustanovka.html

7.3.2. Removal and installation

Establish the car on the lift or a viewing ditch. Put an emphasis under forward wheels, release a lay brake and establish the gear change lever in neutral position. Lift the back bridge so that back wheels could rotate freely.

PERFORMANCE ORDER
1. Remove a safety arm.
2. Establish collar А.70025 on elastic муфте (fig. Elastic муфта connections карданного a shaft with a transmission see) and, turning a shaft, turn away a nut of bolts of fastening of a flange elastic муфты; remove bolts, and then a coupling collar.
3. Disconnect back карданный a shaft from a flange of a leading gear wheel of the main transfer.
4. Disconnect оттяжную a spring directing a back cable of a lay brake.
5. Disconnect a cross-beam of an intermediate support from a body floor and remove карданную transfer to a direction of a forward part of the car.
6. Kardannuju transfer to gathering establish on the car in an order, the return to removal.

«The previous page
7.3.1. Features of the device
The following page»
7.3.3. Check of a technical condition without dismantling