VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
3.1. Features of the device
3.2. Possible malfunctions of the engine, their reason and elimination methods
3.3. Removal and engine installation
3.4. Engine dismantling
3.5. Engine assemblage
3.6. Bench tests of the engine
3.7. Engine check on the car
3.8. The block of cylinders
3.9. Pistons and rods
3.9.1. Features of the device
3.9.2. Выпрессовка a piston finger
3.9.3. Clearing
3.9.4. Piston selection to the cylinder
3.9.5. Backlash check between the piston and a finger
3.9.6. Check of backlashes between piston flutes and rings
3.9.7. Backlash check between loose leaves of a rod and cranked shaft
3.9.8. The control of weight of pistons
3.9.9. Assemblage of shatunno-piston group
3.9.10. Check запрессовки a finger
3.9.11. Parallelism of axes of the bottom head of a rod and a piston finger
3.10. A cranked shaft and a flywheel
3.11. A head of cylinders and клапанный the mechanism
3.12. A camshaft and its drive
3.13. Cooling system
3.14. Greasing system
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386




3-9-3-ochistka.html

3.9.3. Clearing

PERFORMANCE ORDER
1. Remove a deposit formed on the bottom of the piston and in flutes of piston rings, and from lubricant channels of the piston and a rod remove all adjournment.
2. Carefully check up, whether is not present on details of damages. Cracks of any character on the piston, piston rings, a finger, a rod and a cover are inadmissible and replacement of details demand. If on a working surface of loose leaves deep risks or they are worn too out, replace loose leaves new.

«The previous page
3.9.2. Выпрессовка a piston finger
The following page»
3.9.4. Piston selection to the cylinder