VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
3.1. Features of the device
3.2. Possible malfunctions of the engine, their reason and elimination methods
3.3. Removal and engine installation
3.4. Engine dismantling
3.5. Engine assemblage
3.6. Bench tests of the engine
3.7. Engine check on the car
3.8. The block of cylinders
3.9. Pistons and rods
3.9.1. Features of the device
3.9.2. Выпрессовка a piston finger
3.9.3. Clearing
3.9.4. Piston selection to the cylinder
3.9.5. Backlash check between the piston and a finger
3.9.6. Check of backlashes between piston flutes and rings
3.9.7. Backlash check between loose leaves of a rod and cranked shaft
3.9.8. The control of weight of pistons
3.9.9. Assemblage of shatunno-piston group
3.9.10. Check запрессовки a finger
3.9.11. Parallelism of axes of the bottom head of a rod and a piston finger
3.10. A cranked shaft and a flywheel
3.11. A head of cylinders and клапанный the mechanism
3.12. A camshaft and its drive
3.13. Cooling system
3.14. Greasing system
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386







3-9-2-vypressovka-porshnevogo-palca.html

3.9.2. Выпрессовка a piston finger

PERFORMANCE ORDER
1. To remove a finger it is necessary on a press, with the help оправки А.60308 and support with cylindrical dredging which the piston keeps within. Before выпрессовкой a finger remove piston rings.
2. If the removed details are worn a little out and not damaged, they can be again used. Therefore at dismantling them mark further to collect group with the same details.
«The previous page
3.9.1. Features of the device		 The following page»
3.9.3. Clearing