< Car operation. VAZ 2101, 2102 (Zhigulis)
VAZ 2101, 2102
1. Specifications
2. Operation and service
2.1. Car operation
2.1.1. Engine start-up
2.1.2. Car movement
2.1.3. Braking and parking
2.1.4. Updating of a corner of an advancing of ignition
2.1.5. Safety measures at car operation
2.1.6. Care of a body
2.1.7. Car storage
2.2. Car maintenance service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


2.1. Car operation

The fuel pump

After long parking of the car before engine start-up it is recommended to pump up fuel in поплавковую the carburettor chamber for what some times press the lever of 1 manual pumping of fuel.

At temperature 25 ° With and more low, and also during strong snowfalls for more intensive warming up of the engine and preservation of its thermal mode a radiator lattice it is recommended to close a minus a protective apron.

Start-up of the cold engine

1. Establish the gear change lever in neutral position and extend the handle of management air заслонкой the carburettor.
2. At very low temperature of air include for some seconds of a headlight for heating of electrolit in the storage battery and press a coupling pedal.
3. Insert a key into the switch of ignition and include a starter, without pressing thus an accelerator pedal. If the engine does not start to work at the first attempt, switch off ignition and approximately through 30 with repeatedly include a starter. More than on 10 with to include a starter it is not recommended.
4. After engine start-up release the ignition key which will automatically come back in position «1». At steady work of the engine after start-up smoothly release a pedal of coupling and, gradually in process of growth of frequency of rotation of a cranked shaft, drown the handle of management air заслонкой the carburettor.

Start-up of the hot engine

At the hot engine the handle of management air заслонки the carburettor should be drowned. Before engine start-up smoothly press an accelerator pedal approximately on third of its course. After start-up as soon as the engine will start to work trouble-free, gradually release a pedal.

«The previous page
2. Operation and service
The following page»
2.1.1. Engine start-up