VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
3.1. Features of the device
3.2. Possible malfunctions of the engine, their reason and elimination methods
3.3. Removal and engine installation
3.4. Engine dismantling
3.5. Engine assemblage
3.6. Bench tests of the engine
3.7. Engine check on the car
3.8. The block of cylinders
3.9. Pistons and rods
3.10. A cranked shaft and a flywheel
3.11. A head of cylinders and клапанный the mechanism
3.12. A camshaft and its drive
3.12.1. Features of the device
3.12.2. Backlash adjustment between levers and camshaft cams
3.12.3. Adjustment of a tension of a chain
3.12.4. Camshaft check
3.12.5. Check of the case of bearings of a camshaft
3.12.6. Натяжитель
3.12.7. A chain of a drive of a camshaft
3.13. Cooling system
3.14. Greasing system
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices



3.12.5. Check of the case of bearings of a camshaft

1. Wash out and clear the case of bearings of a camshaft and channels for an oil supply.
2. Check up diameter of apertures in support. If the backlash between necks of a camshaft and support exceeds 0,2 mm (limiting deterioration), the case of bearings replace.
3. Internal basic surfaces should be smooth, without задиров; if there are damages on surfaces or cracks on the case, replace the case of bearings of a camshaft.

«The previous page
3.12.4. Camshaft check
The following page»
3.12.6. Натяжитель