VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
12.1. Features of the device
12.2. Repair of a skeleton of a body
12.3. Paint and varnish coverings
12.4. Anticorrosive protection of a body
12.5. Doors
12.5.1. Removal and installation
12.5.2. Dismantling of forward doors
12.5.3. Assemblage of forward doors
12.5.4. Dismantling and assemblage of back doors
12.5.5. Adjustment of position of doors
12.5.6. Adjustment of locks of doors
12.5.7. Adjustment стеклоподъемника
12.6. A cowl, a luggage carrier cover, bumpers
12.7. Osteklenie bodies and a windscreen washer
12.8. The panel of devices
12.9. Seats
12.10. A heater
12.11. Possible malfunctions of a body, their reason and elimination methods
13. Features of repair
14. Appendices


7b94d386




12-5-2-razborka-perednikh-dverejj.html

12.5.2. Dismantling of forward doors

The lock of a forward right door

1 – the case of a clamp of the lock;
2 – a rotor;
3 – a clamp cracker;
4 – a cracker spring;
5 – the lock switch;
6 – the external handle of the lock;
7 – the button of blocking of the lock;
8 – draught of blocking of the lock;
9 – a spring of the lever of blocking of the lock;
10 – the lever of an internal drive of the lock;
11 – draught of an internal drive;
12 – the lever of blocking of the lock;
13 – the central platen;
15 – draught of the switch of the lock;
16 – a ratchet;
17 – the lever of an external drive of the lock

Fastening of the internal handle of a drive of the lock of a door

1 – the screw of fastening of the handle;

2 – the internal handle;

3 – a nut of fastening of an axis of a tension roller of a cable стеклоподъемника


At replacement of details and door mechanisms its dismantling is required.

PERFORMANCE ORDER
1. Turn away screws of fastening of an armrest and remove it. Having hooked a screw-driver, remove facing by 1 internal handle of 2 doors.
2. Remove the handle 2 стеклоподъемника, having wrung out the socket of the handle and having taken out by means of the adaptation 1 А.78034 a lock spring.
3. Overcoming effort of spring plastic holders, remove a door upholstery.
4. At the top position опускного glasses turn away screws of 1 fastening of a back fillet and a nut of fastening of a forward fillet, remove fillets and lower glass downwards (2 – a cable стеклоподъемника; 3 – nuts of fastening of the mechanism стеклоподъемника; 4 – the internal handle of a drive of the lock; 5 – a tension roller; 6 – an emphasis опускного glasses).
5. Having weakened a nut of a tension roller 5 стеклоподъемника, disconnect a cable 2 from a holder опускного glasses, remove it from rollers, lower glass downwards and, rejecting to itself its bottom edge, take out from a door through the bottom aperture.
6. Turn away a nut of 3 fastenings, and remove the mechanism стеклоподъемника.
7. Remove a sealant опускного glasses, turn out screws of fastening of a framework of rotary glass and remove it in gathering with a framework.
8. Turn away the button 7 (fig. the Lock of a forward right door) blocking of the lock see and screws 1 (fig. Fastening of the internal handle of a drive of the lock of a door see) fastenings of an arm of the internal handle 2 drives of the lock; turn away screws 3 (1 – the button of blocking of the lock; 2 – draught of blocking of the lock) also remove the lock together with draughts of a drive, preliminary having disconnected draught 15 (fig. the Lock of a forward right door see) from a lead of the switch of the lock.
9. Remove the handle of an external drive of the lock of a door, having turned away a fastening nut.
10. Turn away bolts and remove the door terminator.
11. Remove bottom уплотнители опускного glasses together with holders.

«The previous page
12.5.1. Removal and installation
The following page»
12.5.3. Assemblage of forward doors