VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
12.1. Features of the device
12.2. Repair of a skeleton of a body
12.3. Paint and varnish coverings
12.4. Anticorrosive protection of a body
12.5. Doors
12.6. A cowl, a luggage carrier cover, bumpers
12.7. Osteklenie bodies and a windscreen washer
12.7.1. Windscreen replacement
12.7.2. Replacement of back glass
12.7.3. Removal and installation of the pump of a washer of a windscreen
12.7.4. Removal and installation of jets of a washer of a windscreen
12.8. The panel of devices
12.9. Seats
12.10. A heater
12.11. Possible malfunctions of a body, their reason and elimination methods
13. Features of repair
14. Appendices

7b94d386 Расходомеры на коллекторе теплого пола.


12.7. Osteklenie bodies and a windscreen washer

1. To take out the damaged glass, remove levers of screen wipers, a fringing of a sealant and, pressing the top corners of glass, squeeze out it outside. Thus the assistant should support glass outside.
2. At windscreen installation, wash out gasoline grooves of a sealant 2.
3. Put on a sealant with a fringing glass.
4. In a groove by which the sealant 2 is put on a flange of an aperture of a body, enclose a cord 1 by means of a screw-driver.
5. Establish glass in an aperture of a body and pull the cord ends from within bodies that the sealant has sat down into place. The assistant should press slightly on glass outside.

«The previous page
12.6.3. Removal and installation of bumpers
The following page»
12.7.1. Windscreen replacement