VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
12.1. Features of the device
12.2. Repair of a skeleton of a body
12.3. Paint and varnish coverings
12.4. Anticorrosive protection of a body
12.5. Doors
12.6. A cowl, a luggage carrier cover, bumpers
12.7. Osteklenie bodies and a windscreen washer
12.7.1. Windscreen replacement
12.7.2. Replacement of back glass
12.7.3. Removal and installation of the pump of a washer of a windscreen
12.7.4. Removal and installation of jets of a washer of a windscreen
12.8. The panel of devices
12.9. Seats
12.10. A heater
12.11. Possible malfunctions of a body, their reason and elimination methods
13. Features of repair
14. Appendices


7b94d386




12-7-4-snyatie-i-ustanovka-zhiklerov-omyvatelya-vetrovogo-stekla.html

12.7.4. Removal and installation of jets of a washer of a windscreen

Jet of a washer of a windscreen

1 – a spray;

2 – the screw;

3 – the plug;

4 – the case of a jet with the union


In case of a contamination of jets remove and disassemble them.

PERFORMANCE ORDER
1. From outside boxes воздухопритока bodies slightly compress the plastic plug 3, and from above picking up its screw-driver and overcoming resistance, take out a jet in gathering with the plug.
2. Turn out the screw 2, carefully clear all details and blow compressed air a cavity of the case 4 and a spray 1.
3. After assemblage insert the plug 3 into a body aperture. Then sharply insert a jet into the plug 3 that the case 4 groove has risen in закраины plugs. Connect a tube to a jet.
4. Check up jet action.
5. A direction of a stream of a liquid adjust turn of the case 4 in the plug 3 and turn of a spray 1 at easing of the screw 2. Upon termination of adjustment wrap the screw 2.

«The previous page
12.7.3. Removal and installation of the pump of a washer of a windscreen
The following page»
12.8. The panel of devices