|
|
|
|
12-7-3-snyatie-i-ustanovka-nasosa-omyvatelya-vetrovogo-stekla.html
12.7.3. Removal and installation of the pump of a washer of a windscreenThe delivery pump of a washer of a windscreen
1 – a cover;
2 – a switch holder;
3 – the bottom contact of the switch;
4 – колодка with contacts;
5 – the top contact of the switch;
6 – the final valve;
7 – the inlet valve;
8 – the pump case;
9 – the button;
10 – a returnable spring; |
11 – a rod;
12 – a cover;
13 – directing a rod;
14 – the top contact of the switch;
15 – the holder of mobile contacts;
16 – the bottom contact of the switch;
17 – directing the holder;
18 – a diaphragm;
19 – a casing |
The scheme of a washer of a wind window
|
|
1 – jets;
2 – a tee;
3 – the pump;
4 – a tank |
The pump диафрагменного type, not folding, with a foot drive. In case of malfunctions in work, replace its new.
| PERFORMANCE ORDER |
| 1. For pump removal turn away a nut of fastening and remove it in gathering. |
| 2. Disconnect electric wires from the pump and remove tubes from unions. |
| 3. Pump installation carry out upside-down. |
|
|
|
|
