|
THE REASON
|
ELIMINATION METHOD
|
|
Dark stains on all surface of a body
|
| Application for a sink of hot water (above 80 °) | Insignificant damages eliminate polishing, at the big damages recolour a body |
| Application этилированного gasoline or other substances corroding a covering for removal of a wax covering | Polish, if necessary recolour a body |
|
Pink stains on the surfaces painted in light colour
|
| Hit of a cooling liquid | Polish the damaged places |
|
Cветлые stains on the surfaces painted in dark colour
|
| Moisture influence at long storage of the car under an air-tight cover | Polish the damaged places, if necessary, paint a body |
|
Enamel has lost initial shine
|
| Use dry обтирочного a material | Polish the damaged places, if necessary, recolour a body |
| Long influence of the sun | Polish, if necessary recolour a body |
| Application for a sink of a body of the substances corroding a covering | Polish the damaged places, if necessary, recolour a body |
|
Water gets into salon
|
| Apertures for a water drain in a windscreen sealant are littered | Remove glass, clean apertures or replace a sealant. At sealant installation combine apertures in a sealant with apertures in a body |
| Tightness of a sealant of a cable of the aerial is broken | Загерметизируйте a sealant with non-drying mastic or replace it |
| The increased backlash on door perimetre. | Adjust position of a door and a lock clamp |
| The metal skeleton of a sealant of a door is crumpled | Replace a sealant |
|
The door opens with the big effort
|
| Погнута an axis of a cracker of a clamp of the lock of a door | Correct or replace an axis |
| Adjustment of position of a door is broken | Adjust door position |
|
The door lock is not blocked by the button or not locked by a key
|
| The top end of the lever of an external drive rests against a fillet of the external handle | Unbend the top end of the lever from a fillet of the handle before reception between them a backlash of 0,5-2 mm |
|
The door does not open the external handle
|
| The backlash between a fillet of the external handle of a door and the top end of the lever of an external drive of the lock is increased | Turn in the top end of the lever to a fillet of the handle before reception of a backlash of 0,5-2 mm |
|
The door is not locked
|
| Breakage or easing of a spring of the central platen of the lock or the lever of an external drive | Replace the lock |
| It is weakened расклепка axes of the lever of an external drive of the lock. At closing the lever tooth does not enter into gearing with a ratchet owing to axial displacement of the lever | Remove the lock and spend reliable расклепку axes |
| Jamming of the lever of an external drive owing to закоксовывания greasing and a dust | Remove the lock, wash out and grease |
|
The door does not open completely the internal handle
|
| Incomplete course of the lever of an internal drive вследствии a draught low speed | Adjust position of the internal handle of a drive of the lock |
|
The cowl lock does not open the handle from salon
|
| Breakage of a cable of a drive of the lock | The length of a cable of a drive of the lock is great |
| The length of a cable of a drive of the lock is great | Adjust length of a cable at the expense of loopback fastening on a lock hook |
|
The cowl is not locked by the lock
|
| Breakage of a spring of the lock | Replace a spring |
| The cable of a drive of the lock is truncated | Adjust length of a cable at the expense of loopback fastening on a lock hook |
| Lock position on a body is broken | Adjust lock position |
|
Opusknoe glass is not fixed in the set position
|
| Easing of fastening of a holder of glass on a cable | Fix a holder, adjust course size опускного glasses |
| Breakage of a spring brake of the mechanism стоклоподъемника | Replace стеклоподъемник |
|
The back of a forward seat does not come back from inclined position at the lifted handle of the mechanism of adjustment
|
| Breakage of a spring of the mechanism | Replace a spring, check up work the mechanism |
|
The back of a forward seat is not fixed in the set position
|
| Breakage of teeths of a clamp of a back | Replace a skeleton of a seat or, having cut down the damaged clamp, weld new with the subsequent painting |
|
Adjustment of position of a forward seat is complicated
|
| Balls have dropped out of a seat sled as were unbent закраины ползунов and directing | Disassemble a sled, insert balls, collect the mechanism and turn in закраины directing and ползунов. If necessary replace a sled |
| Have jammed ползуны in directing in the absence of greasing | Disassemble a sled and grease ползуны with directing |
|
In salon the warmed-up air constantly arrives
|
| Неисправлен a drive of the crane of a heater | Check up a drive condition, fix a draught cover, if necessary replace draught |
| The crane of a heater does not block a liquid stream | Replace the crane |
|
Air arriving in salon, is not warmed up
|
| The crane of a heater owing to malfunction of a drive of the crane does not open | Check up a drive condition, fix a draught cover, if necessary replace draught |
| The crane is faulty | Replace it |
|
Poorly air in salon arrives
|
| The cover drive воздухопритока (the cover is closed) is faulty | Check up a drive condition, fix a draught cover, if necessary replace draught |
