VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
12.1. Features of the device
12.2. Repair of a skeleton of a body
12.3. Paint and varnish coverings
12.4. Anticorrosive protection of a body
12.5. Doors
12.5.1. Removal and installation
12.5.2. Dismantling of forward doors
12.5.3. Assemblage of forward doors
12.5.4. Dismantling and assemblage of back doors
12.5.5. Adjustment of position of doors
12.5.6. Adjustment of locks of doors
12.5.7. Adjustment стеклоподъемника
12.6. A cowl, a luggage carrier cover, bumpers
12.7. Osteklenie bodies and a windscreen washer
12.8. The panel of devices
12.9. Seats
12.10. A heater
12.11. Possible malfunctions of a body, their reason and elimination methods
13. Features of repair
14. Appendices



12.5.6. Adjustment of locks of doors

Before lock adjustment it is recommended to outline a clamp contour on a body rack.

1. If the door is closed too hardly, ослабьте bolts of fastening of a clamp, displace it outside and tighten bolts. If the door is closed poorly – a clamp displace inside. Thus should not be выступания or sticking of a door concerning a body.
2. If the door at closing falls – a clamp lift. If the door at closing rises (sagging in open position) – a clamp lower.
3. If the door badly opens the internal handle position of the internal handle of a drive of the lock is regulated. For this purpose ослабьте screws, крепящие a handle arm, and the handle together with an arm move in the necessary position. Then screws tighten.

«The previous page
12.5.5. Adjustment of position of doors
The following page»
12.5.7. Adjustment стеклоподъемника