VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
12.1. Features of the device
12.2. Repair of a skeleton of a body
12.3. Paint and varnish coverings
12.4. Anticorrosive protection of a body
12.4.1. Preparation and anticorrosive processing of the latent cavities
12.4.2. Restoration of a covering of a bottom of a body and arches of wheels
12.4.3. Body hermetic sealing
12.5. Doors
12.6. A cowl, a luggage carrier cover, bumpers
12.7. Osteklenie bodies and a windscreen washer
12.8. The panel of devices
12.9. Seats
12.10. A heater
12.11. Possible malfunctions of a body, their reason and elimination methods
13. Features of repair
14. Appendices


7b94d386




12-4-1-podgotovka-i-antikorrozionnaya-obrabotka-skrytykh-polostejj.html

12.4.1. Preparation and anticorrosive processing of the latent cavities

The latent cavities bodies (bottom view)

1 – a cross-beam of a floor of a back;
2 – back longerons;
3 – jack arms;
4 – an average cross-beam of a floor;
5 – forward longerons of a floor;
6 – amplifiers of longerons;
7 – arms of the buffer of a forward suspension bracket;
8 – a cross-beam of a forward suspension bracket

The latent cavities bodies (right-side view)

1 – the bottom cross-beam of a back;
2 – trunk floor longerons;
3 – between wings and arches of back wheels;
4 – a trunk floor cross-beam;
5 – forward racks;
6 – connectors боковин and a guard передка;
7 – pockets of doors;
8 – cowl pockets

The latent cavities bodies (left-side view)

1 – the bottom cross-beam передка;
2 – casings of headlights;
3 – the top cross-beam передка;
4 – forward longerons;
5 – a mudguard rack;
6 – a cavity under a forward left wing;
7 – internal and external thresholds of doors;
8 – average cross-beams of a floor;
9 – the central racks;
10 – a back cross-beam of a floor;
11 – back racks

In view of application of the difficult process equipment and necessity of high-quality performance of works, processing of open cavities is recommended to be carried out only at servicing deports of cars.

The latent cavities processed by anticorrosive structures

№№
The cavity name
Through what apertures
Direction of injection of structure
Additional instructions
1
The top cross-beam передка
Through two apertures in front from below
Towards a cross-beam
To remove radiator facing
2
The bottom cross-beam передка
Through an aperture for the starting handle
To the right and to the left
3
Casings of headlights
In front
On all surface
To remove headlights
4
Forward longerons
Through apertures from a motor compartment
Forward and backwards
To open a cowl
5
Racks of mudguards
Through apertures from a motor compartment
Upwards and downwards
To open a cowl
6
Arm of buffers of a forward suspension bracket
In an aperture in an arm
On an internal surface
To lift the car
7
Cross-beam of a forward suspension bracket
Through apertures from below
To the right and to the left
To lift the car
8
Under forward wings
Through an aperture closed заглушкой
Extensively
To remove rubber заглушки
9
Cowl pockets
Through forward apertures of the internal panel of a cowl
Extensively
To open a cowl
10
Internal and external thresholds of doors
Through oval apertures of thresholds at forward racks and through apertures with торцев thresholds under arches of back wheels
Extensively
To remove facings of thresholds at forward doors and заглушки under arches
11
Forward racks
Through apertures from salon
Downwards
To remove an upholstery

Protection against corrosion of the latent cavities

PERFORMANCE ORDER
1. Establish the car on the lift, remove details and an upholstery, interfering access to the latent cavities.
2. Wash out water 40–50 ° With through technological and drainage apertures the latent cavities specified in the table, a bottom of a body, an arch of wheels to вытекания at its finest. Thus rotary glasses should be closed, опускные – are lifted.
3. Remove got to salon and a luggage carrier a moisture, blow compressed air all latent cavities and other places of drawing of anticorrosive structures.
4. Overtake the car in the chamber for drawing of anticorrosive structure and put on the lift. Put dispersion anticorrosive structure in the places specified in drawings (fig. the Latent cavities of a body (the bottom view), the Latent cavities of a body (the right-side view) and fig. the Latent cavities of a body (the left-side view) see).
5. Lower the car from the lift, clear of pollution obverse surfaces of a body the rags moistened in uajt-spirite.

«The previous page
12.4. Anticorrosive protection of a body
The following page»
12.4.2. Restoration of a covering of a bottom of a body and arches of wheels