| 1. Having established the lever of a drive of a lay brake in extreme bottom position, disconnect the ends of cables from levers of a drive brake колодок (subsection 10.6.1 see). |
| 2. Having weakened a counternut 4 (fig. the Drive of a lay brake see) and an adjusting nut 5, remove оттяжную a spring 11 (fig. of the Detail of a drive of a lay brake), then completely turn away a counternut and a nut. |
| 3. Disconnect arms 13 cables from a body floor and a back tip of a cable from a brake board; remove arms and a back cable. |
| 4. Remove a roller 8 with the plug 7, then a protective cover of the lever and the lever in gathering, and also a forward cable. |
| 5. Having taken out шплинт and having removed a persistent washer, disconnect a forward cable from the lever of a drive of a manual brake. |
| 6. Establish a lay brake in sequence, return to removal, with its subsequent adjustment (subsection 10.2.3 see). |
| 7. At installation grease консистентной with greasing ЛИТОЛ-24 or ЛСЦ-15 directing a back cable, a lever axis, the plug of a roller and a tip of a forward cable. |
