< Lay brake. VAZ 2101, 2102 (Zhigulis)
 
VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
10.1. Features of the device
10.2. Check and adjustment of brakes
10.3. An arm of pedals of coupling and a brake
10.4. The main cylinder
10.5. Forward brakes
10.6. Back brakes
10.7. A regulator of pressure of back brakes
10.8. A lay brake
10.8.1. Removal and installation
10.8.2. Check and repair
10.9. Possible malfunctions of brakes, their reasons and elimination methods
11. An electric equipment
12. A body
13. Features of repair
14. Appendices







10-8-stoyanochnyjj-tormoz.html

10.8. A lay brake

Details of a drive of a lay brake

1 – a cover;
2 – a forward cable;
3 – the lever;
4 – the button;
5 – a draught spring;
6 – draught of a latch;
7 – the plug;


8 – a roller;
9 – directing a back cable;
10 – распорная the plug;
11 – оттяжная a spring;
12 – a back cable;
13 – an arm of a back cable


PERFORMANCE ORDER
1. Having established the lever of a drive of a lay brake in extreme bottom position, disconnect the ends of cables from levers of a drive brake колодок (subsection 10.6.1 see).
2. Having weakened a counternut 4 (fig. the Drive of a lay brake see) and an adjusting nut 5, remove оттяжную a spring 11 (fig. of the Detail of a drive of a lay brake), then completely turn away a counternut and a nut.
3. Disconnect arms 13 cables from a body floor and a back tip of a cable from a brake board; remove arms and a back cable.
4. Remove a roller 8 with the plug 7, then a protective cover of the lever and the lever in gathering, and also a forward cable.
5. Having taken out шплинт and having removed a persistent washer, disconnect a forward cable from the lever of a drive of a manual brake.
6. Establish a lay brake in sequence, return to removal, with its subsequent adjustment (subsection 10.2.3 see).
7. At installation grease консистентной with greasing ЛИТОЛ-24 or ЛСЦ-15 directing a back cable, a lever axis, the plug of a roller and a tip of a forward cable.

«The previous page
10.7.3. Check of details
The following page»
10.8.1. Removal and installation





http://b3-b4.ru/