< Arm of pedals of coupling and brake. VAZ 2101, 2102 (Zhigulis)
 
VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
10.1. Features of the device
10.2. Check and adjustment of brakes
10.3. An arm of pedals of coupling and a brake
10.3.1. Removal and installation
10.3.2. Dismantling and assemblage
10.3.3. Check and repair
10.4. The main cylinder
10.5. Forward brakes
10.6. Back brakes
10.7. A regulator of pressure of back brakes
10.8. A lay brake
10.9. Possible malfunctions of brakes, their reasons and elimination methods
11. An electric equipment
12. A body
13. Features of repair
14. Appendices







10-3-kronshtejjn-pedalejj-scepleniya-i-tormoza.html

10.3. An arm of pedals of coupling and a brake

PERFORMANCE ORDER
1. Remove an arm of a shaft of the steering mechanism as it is specified in subsection 9.3.1.
2. Disconnect nuts, крепящие the main cylinder of coupling and the main cylinder of a brake to an arm.
3. Turn away a nut of fastening of an arm to a body and remove an arm, having disconnected wires from a plug receptacle of a portable lamp and from the stoplight switch.
4. Installation carry out in return sequence. Thus watch correctness of installation of a pusher in a nest on the piston of the main cylinder of coupling.

«The previous page
10.2.7. Backlash adjustment between колодками and a drum
The following page»
10.3.1. Removal and installation





http://b3-b4.ru/