VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
10.1. Features of the device
10.2. Check and adjustment of brakes
10.3. An arm of pedals of coupling and a brake
10.3.1. Removal and installation
10.3.2. Dismantling and assemblage
10.3.3. Check and repair
10.4. The main cylinder
10.5. Forward brakes
10.6. Back brakes
10.7. A regulator of pressure of back brakes
10.8. A lay brake
10.9. Possible malfunctions of brakes, their reasons and elimination methods
11. An electric equipment
12. A body
13. Features of repair
14. Appendices



10.3.1. Removal and installation

1. Remove an arm of a shaft of the steering mechanism as it is specified in subsection 9.3.1.
2. Disconnect nuts, крепящие the main cylinder of coupling and the main cylinder of a brake to an arm.
3. Turn away a nut of fastening of an arm to a body and remove an arm, having disconnected wires from a plug receptacle of a portable lamp and from the stoplight switch.
4. Installation carry out in return sequence. Thus watch correctness of installation of a pusher in a nest on the piston of the main cylinder of coupling.

«The previous page
10.3. An arm of pedals of coupling and a brake
The following page»
10.3.2. Dismantling and assemblage