VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
3.1. Features of the device
3.2. Possible malfunctions of the engine, their reason and elimination methods
3.3. Removal and engine installation
3.4. Engine dismantling
3.5. Engine assemblage
3.6. Bench tests of the engine
3.7. Engine check on the car
3.8. The block of cylinders
3.9. Pistons and rods
3.10. A cranked shaft and a flywheel
3.11. A head of cylinders and клапанный the mechanism
3.12. A camshaft and its drive
3.13. Cooling system
3.14. Greasing system
3.14.1. Features of the device
3.14.2. Oil replacement
3.14.3. The oil pump
3.14.4. Ventilation картера the engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices

7b94d386 Способный защищать кожу от разных видов излучений, какао калорийность.


3.14.2. Oil replacement

1. To replace oil it is necessary on the hot engine. Completely to merge oil, it is necessary to wait not less than 10 mines after opening of a drain aperture.
2. Replacing oil, it is necessary to replace and the oil filter which remove by means of adaptation A.60312. At installation the filter wrap manually.
3. At oil replacement it is recommended to wash out greasing system, for what:
      – After an engine stop merge fulfilled oil and, without removing the oil filter, fill in промывочное oil VNIINP-FD to a mark «MIN» on the index of level of oil (2,9);
      – Start the engine and allow to it to work on this oil of 10 mines on the minimum turns of idling;
      – Completely merge промывочное oil and remove the old oil filter;
      – Put the new filter and fill in the oil corresponding to a season.

«The previous page
3.14.1. Features of the device
The following page»
3.14.3. The oil pump