VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
3.1. Features of the device
3.2. Possible malfunctions of the engine, their reason and elimination methods
3.3. Removal and engine installation
3.4. Engine dismantling
3.5. Engine assemblage
3.6. Bench tests of the engine
3.7. Engine check on the car
3.8. The block of cylinders
3.9. Pistons and rods
3.10. A cranked shaft and a flywheel
3.11. A head of cylinders and клапанный the mechanism
3.12. A camshaft and its drive
3.13. Cooling system
3.14. Greasing system
3.14.1. Features of the device
3.14.2. Oil replacement
3.14.3. The oil pump
3.14.4. Ventilation картера the engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386







3-14-1-osobennosti-ustrojjstva.html

3.14.1. Features of the device

Greasing system

1 – the oil pump;
2 – oil картер;
3 – the channel of giving of oil from the pump to the filter;
4 – the horizontal channel for giving of oil from the filter in an oil highway;
5 – the channel for oil giving to a gear wheel of a drive of the oil pump and the ignition distributor;
6 – the channel in a neck of a cranked shaft;
7 – a forward epiploon of a cranked shaft;
8 – the channel of giving of oil from an oil highway to the radical bearing and to the platen of a drive of the oil pump and the ignition distributor;
9 – a gear wheel of a drive of the oil pump and the ignition distributor;
10 – the platen of a drive of the oil pump and the ignition distributor;
11 – the channel for an oil drain;
12 – the channel in a camshaft cam;
13 – the main channel in a camshaft;
14 – the channel in a basic neck of a camshaft;
15 – ring bore on an average basic neck of a camshaft;
16 – a cover маслоналивной mouths;
17 – the inclined channel in a head of cylinders;
18 – the vertical channel in the block of cylinders;
19 – an oil highway;
20 – the gauge of a control lamp of pressure of oil;
21 – the channel of giving of oil to the radical bearing;
22 – the channel of giving of oil from the radical bearing to шатунному;
23 – the index of level of oil;
24 – the oil filter

Greasing system the combined. Under pressure support and camshaft cams, bearings of the platen 10 and a gear wheel 9 drives of the oil pump 1 and the ignition distributor are greased radical and шатунные bearings. Oil, вытекаюшим from backlashes and sprayed by moving details, greases walls of cylinders, pistons with piston rings, piston fingers in piston lugs, a chain of a drive of a camshaft, a support of levers of a drive of valves, and also cores of valves in them направляюших plugs.

At pressure drop of oil below the admissible the control lamp of insufficient pressure of oil lights up.

The oil pump шестеренчатого type, is established inside картера and fastens to the block of cylinders two bolts.

The oil filter – полнопоточный, not folding, with перепускным and противодренажным valves.


«The previous page
3.14. Greasing system
The following page»
3.14.2. Oil replacement