VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
12.1. Features of the device
12.2. Repair of a skeleton of a body
12.3. Paint and varnish coverings
12.3.1. Polishing
12.3.2. A repaint of a body synthetic enamel
12.3.3. Colouring of separate details
12.4. Anticorrosive protection of a body
12.5. Doors
12.6. A cowl, a luggage carrier cover, bumpers
12.7. Osteklenie bodies and a windscreen washer
12.8. The panel of devices
12.9. Seats
12.10. A heater
12.11. Possible malfunctions of a body, their reason and elimination methods
13. Features of repair
14. Appendices


7b94d386







12-3-1-polirovka.html

12.3.1. Polishing

For preservation of a paint and varnish covering of a body long time and its maintenances in a good condition, is necessary to select the polishing means corresponding to a condition of a covering. Thus, it is necessary to observe recommendations about their application.

In first two-three months of operation of the car, wash a body with cold water. For polishing of a new covering (till three years) use безабразивные polishing means for new coverings.

At operation of the car from three till five years use автополироли for the exposed to the wind coverings, incorporating a small amount of abrasive substances; after five years of intensive operation apply автополироли to old coverings.

In avoidance of drying of a polyrole, polish a body with small sites manually a pure flannel.

For elimination of minor defects of a paint and varnish covering polishing pastes ПМА-1 or ПМА-2 can be used. It is possible to polish manually and mechanically, flannel or beaver-lamb circles.

Before the use paste mix, at загустении dilute with water. After polishing wipe a surface a pure flannel.
«The previous page
12.3. Paint and varnish coverings
The following page»
12.3.2. A repaint of a body synthetic enamel