VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
9.1. Features of the device
9.2. Survey, check and steering adjustment
9.3. The steering mechanism
9.4. Draughts and spherical hinges of a steering drive
9.5. An arm of the pendular lever
9.5.1. Removal and dismantling
9.5.2. Check
9.5.3. Assemblage and installation
9.6. Possible malfunctions of a steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386




9-5-1-snyatie-i-razborka.html

9.5.1. Removal and dismantling

Cut of an arm of the pendular lever

1 – the pendular lever;

2 – the arm case;

3 – a washer;

4 – an adjusting nut;

5 – шплинт;

6 – the top washer;

7 – a sealant;

8 – the plug;

9 – a lever axis;

10 – the bottom washer;

11 – самоконтрящаяся a nut

PERFORMANCE ORDER
1. For removal of an arm of the pendular lever separate the pendular lever from spherical fingers of average and lateral right draughts, расшплинтовав and having turned on preliminary nuts and having taken out stripper А.47052 spherical fingers from lever nests.
2. Then turn away bolts of fastening of an arm to a longeron and remove an arm.
3. Fix an arm in a vice, расшплинтуйте and turn away a nut 4 (fig. the Cut of an arm of the pendular lever see).
4. Then remove washers 3 both 6 and the pendular lever 1 in gathering with an axis 9, a washer 10 and самоконтрящейся a nut 11.
5. Remove уплотнители 7 and выпрессуйте plugs 8.

«The previous page
9.5. An arm of the pendular lever
The following page»
9.5.2. Check