| 1. Расшплинтуйте also turn away a nut with which spherical fingers of lateral draughts fasten to rotary levers.
| 2. Stripper А.47052 take out spherical fingers from conic nests on levers.
| 3. Расшплинтуйте also turn away a nut of fastening of spherical fingers of average and lateral bent for сошке and to the pendular lever. Using stripper А.47035, take out fingers from corresponding nests on levers and remove draughts.
|4. Installation of draughts of a steering make in an order, the return to removal.
|5. All nuts of spherical fingers tighten динамометрическим a key with the subsequent шплинтовкой. If nut cut does not coincide with an aperture for шплинта a nut tighten on a corner, smaller 60 °, for maintenance шплинтовки.
|6. After installation of draughts adjust a convergence of forward wheels.