VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
4.1. The power supply system
4.2. The carburettor
4.2.1. Features of the device
4.2.2. Idling adjustment
4.2.3. Installation of level of fuel in поплавковой to the chamber
4.2.4. Adjustment of a drive of the carburettor
4.2.5. Removal and carburettor installation on the car
4.2.6. Carburettor dismantling
4.2.7. Clearing and check of a technical condition
4.2.8. Carburettor assemblage
4.2.9. Adjustment and check of the carburettor after assemblage
4.2.10. Release of the fulfilled gases
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386




4-2-7-ochistka-i-proverka-tekhnicheskogo-sostoyaniya.html

4.2.7. Clearing and check of a technical condition

THE FUEL FILTER

PERFORMANCE ORDER
Wash out the filter in gasoline and blow compressed air. Check up a condition of the filter and condensing conic corbel of a stopper of the filter. If the filter or a stopper are damaged, replace their new.

ПОПЛАВКОВЫЙ THE MECHANISM

PERFORMANCE ORDER
Wash out details in acetone or gasoline. The float should not have damages and any distortions of the form. The weight of a float should make 11–13 On condensing surfaces of the needle valve and its saddle the damages breaking tightness of the valve are not supposed. The valve should move freely in the nest, and its ball freely moves and not to hang. Faulty details replace new.

CARBURETTOR COVER

PERFORMANCE ORDER
1. Clear of a dirt and oil a cover both all apertures and channels. Wash out a cover in gasoline or acetone and blow compressed air.
2. Examine condensed surfaces of a cover. If damages are found out, replace a cover new.

THE STARTING ARRANGEMENT

PERFORMANCE ORDER
All details of the starting arrangement clear, wash out gasoline and blow compressed air. Examine the details, damaged replace new.

JETS AND ЭМУЛЬСИОННЫЕ TUBES

PERFORMANCE ORDER
Clear jets and эмульсионные tubes of a dirt and resinous adjournment. Wash out their acetone or gasoline and blow compressed air.

The prevention

It is not supposed to clean jets metal tools or a wire, and also to wipe jets or other details of the carburettor cotton wool, a fabric or rags as fibers can litter toplivno-emulsionnyj a path. At a strong contamination it is possible to clear jets a needle from the soft tree, moistened with acetone.


THE CARBURETTOR CASE

PERFORMANCE ORDER
Clear the case of a dirt and oil. Wash out the case and its channels gasoline or acetone and blow compressed air. If necessary channels and эмульсионные wells clear special development. Examine condensed surfaces of the case, at their damage – replace the case new.

THE ACCELERATING PUMP

PERFORMANCE ORDER
1. Clear pump details, wash out them and blow compressed air. Check up ease of moving of a ball in the valve-screw 9 (fig. of the Detail of the case of the carburettor see) and a condition of condensed surfaces and linings.
2. Check up ease of movement of mobile elements of the pump (the lever, a roller, diaphragm details). Jammings are not supposed. The diaphragm should be whole, without deformations. The damaged details replace new.

PNEUMODRIVE THROTTLE ЗАСЛОНКИ THE SECONDARY CHAMBER

PERFORMANCE ORDER
Clear details, wash out and blow compressed air. Check up a diaphragm condition, it should not have damages.

THE CASE THROTTLE ЗАСЛОНОК AND ITS DETAILS

PERFORMANCE ORDER
Clear details and wash out their gasoline or acetone. Examine the details, damaged replace.

«The previous page
4.2.6. Carburettor dismantling
The following page»
4.2.8. Carburettor assemblage