VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
4.1. The power supply system
4.2. The carburettor
4.2.1. Features of the device
4.2.2. Idling adjustment
4.2.3. Installation of level of fuel in поплавковой to the chamber
4.2.4. Adjustment of a drive of the carburettor
4.2.5. Removal and carburettor installation on the car
4.2.6. Carburettor dismantling
4.2.7. Clearing and check of a technical condition
4.2.8. Carburettor assemblage
4.2.9. Adjustment and check of the carburettor after assemblage
4.2.10. Release of the fulfilled gases
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386




4-2-10-vypusk-otrabotavshikh-gazov.html

4.2.10. Release of the fulfilled gases

System of release of gases

1 – a lining;
2 – a reception pipe of mufflers;
3 – an arm of fastening of a reception pipe to a transmission;
4 – collars for connection of pipes of mufflers;
5 – the additional muffler;
6 – the basic muffler;
7 – a pillow of fastening of an exhaust pipe;
8 – an exhaust pipe of the muffler of the car VAZ-2102

The fulfilled gases are taken away from the engine from a final collector through a reception pipe of 2 mufflers, then through the additional muffler 5 and the basic muffler 6.

Between flanges of a collector and a reception pipe the sealing lining 1 is established. Pipes of mufflers incorporate among themselves collars 4.

The release system is suspended on the car in three points.

The reception pipe fastens to an arm 3 established on a back cover of a transmission. To a body floor two belts the basic muffler and rubber pillows 7 – an exhaust pipe of mufflers fastens.

Mufflers welded, together with pipes form not folding knots and at repair, in case of failure, should be replaced with the new.


«The previous page
4.2.9. Adjustment and check of the carburettor after assemblage
The following page»
5. Ignition system