|
|
|
|
12-6-1-snyatie-i-ustanovka-kapota.html
12.6.1. Removal and cowl installationCowl removal
|
|
1 – a cowl;
2 – a cowl emphasis;
3 – a bolt of fastening of a loop of a cowl;
4 – a loop
|
The cowl 1 is hung on a body on a first line and locked by the lock. A drive of the lock of a cowl тросовый, the handle is located in a body, on the left side, under the panel of devices. The cowl is kept in open position by an emphasis 2.
| PERFORMANCE ORDER |
| 1. To remove a cowl, disconnect an emphasis and turn away bolts of fastening of loops to a cowl. |
| 2. Installation spend upside-down. Before a definitive tightening of bolts of fastening of loops of a cowl adjust cowl position that it settled down in an aperture of a body with identical backlashes. For adjustment the increased apertures in cowl loops are provided. |
|
The cowl lock
|
|
1 – the lock case;
2 – a spring;
3 – a pusher;
4 – a hook;
5 – draught of a drive;
6 – the drive handle |
If the lock unreliably locks a cowl or to close and open a cowl difficultly, it is required to adjust lock position, for this purpose at an open cowl:
– Outline contours of the case of 1 lock and ослабьте fastening nuts;
– Move the lock in the necessary position, tighten nuts of fastening and check up lock installation.
|
|
|
