VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
9.1. Features of the device
9.2. Survey, check and steering adjustment
9.2.1. The general survey
9.2.2. Check and backlash adjustment in bearings of a worm of the steering mechanism
9.2.3. Check and backlash adjustment in gearing of a roller with a worm
9.3. The steering mechanism
9.4. Draughts and spherical hinges of a steering drive
9.5. An arm of the pendular lever
9.6. Possible malfunctions of a steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386




9-2-2-proverka-i-regulirovka-zazora-v-podshipnikakh-chervyaka-rulevogo-mekhanizma.html

9.2.2. Check and backlash adjustment in bearings of a worm of the steering mechanism

Cut картера the steering mechanism

1 – a plate of the adjusting screw of a shaft сошки;
2 – the adjusting screw of a shaft сошки;
3 – a nut of the adjusting screw;
4 – a stopper маслоналивного apertures;
5 – a cover картера the mechanism;
6 – a worm;
7 – картер the steering mechanism;
8 – сошка;
9 – a fastening nut сошки to a shaft;
10 – a washer spring fastening nuts сошки;
11 – a shaft epiploon сошки;
12 – the bronze plug of a shaft сошки;
13 – a shaft сошки;
14 – a shaft roller сошки;
15 – a shaft of a worm;
16 – the top ball-bearing;
17 – the bottom ball-bearing;
18 – adjusting linings;
19 – the bottom cover of the bearing of a worm;
20 – a roller axis;
21 – the needle bearing;
22 – an epiploon of a shaft of a worm

PERFORMANCE ORDER
1. Establish forward wheels in position of rectilinear movement and, turning a steering wheel in that and other party, check up, whether the distance between an end face картера 7 (fig. the Cut картера the steering mechanism see) steering mechanism and a shaft tip changes. Distance change is a backlash sign in bearings of a worm.
2. For backlash adjustment in bearings of a worm, having turned a steering wheel in a left-hand side on 1–1,5 turns, turn away bolts of fastening of the bottom cover 19 and merge oil from картера the steering mechanism.
3. Remove the bottom cover, remove one of adjusting linings 18 or replace with its more thin.

The prevention

Adjusting linings are delivered in spare parts in the thickness of 0,10 and 0,15 mm.


4. Having fixed the bottom cover, again check up, whether there is no axial moving of a worm to bearings. In the absence of moving fill in in картер the steering mechanism of 0,215 l трансмиссионного oils ТАД-17и.
5. Check up effort of turn of a steering wheel, having established forward wheels on a smooth tile. It should not exceed 245 Н (25 кгс).

«The previous page
9.2.1. The general survey
The following page»
9.2.3. Check and backlash adjustment in gearing of a roller with a worm