VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
8.1. A forward suspension bracket
8.2. A back suspension bracket
8.2.1. Features of the device
8.2.2. Removal and suspension bracket installation
8.2.3. Check of a technical condition
8.3. Shock-absorbers
8.4. Possible malfunctions of a running gear, their reason and elimination methods
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices

7b94d386 Компьютерная программа для зрения


8.2.3. Check of a technical condition

Before check all details carefully wash out.

Rubber details, plugs and sheetings at a sink protect from action of solvents.


Specification for check of a spring of a back suspension bracket

1. Check up the elastic characteristic of springs on control points, it is preliminary triple having pressed out them before contact of coils.
The prevention

Springs of a back suspension bracket of cars VAZ-2101 and VAZ-21011 are classified on length under loading 2989 Н (305 кгс): the group And – is more length 273 mm, group In – the length is less 273 mm. They are marked also, as well as springs of a forward suspension bracket.

2. Check up, whether there is no spring deformation. If elasticity does not correspond to the drawing or deformation data can become a cause of infringement of working capacity of a spring, replace it.
3. Check up a condition of rubber basic linings of springs; in case of need, replace their new.


1. Check up, whether bars are deformed; if it is possible, straighten them.
2. Whether there are no cracks on arms of a beam of the back bridge and a body; at detection of cracks – repair arms.
3. A condition of elastic plugs of hinges of a bar; if necessary, replace their new, using the complete set of adaptations 67.7820.9517.

«The previous page
8.2.2. Removal and suspension bracket installation
The following page»
8.3. Shock-absorbers