VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
5.1. Installation of the moment of ignition
5.2. A backlash between breaker contacts in the ignition distributor
5.3. Check of devices of ignition at the stand
5.3.1. The ignition distributor
5.3.2. The ignition coil
5.3.3. Spark plugs
5.3.4. The ignition switch
5.3.5. Check of elements for suppression of a radio noise
5.4. Possible malfunctions of ignition, their reason and elimination methods
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices



5.3.2. The ignition coil

It is necessary to make following checks for the control of serviceability of the coil of ignition.

Ohmic resistance of a primary winding at 20 ° With should make 3,07–3,5 Ohm, and a secondary winding – 5400–9200 clod.

At isolation check on weight the ignition coil should maintain pressure of an alternating current 1500 In and 50 Hz, submitted during 1 mines between one end of a primary winding and the case, without causing categories.

Resistance of isolation on weight should be not less than 50 МОм.
«The previous page
5.3.1. The ignition distributor
The following page»
5.3.3. Spark plugs