VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
4.1. The power supply system
4.1.1. Features of the device
4.1.2. The air filter
4.1.3. The fuel pump
4.1.4. A fuel tank
4.2. The carburettor
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices



4.1.4. A fuel tank

Fuel tank and топливопроводы

1 – the fuel pump;
2 – a hose from the fuel pump to the carburettor;
3 – the carburettor;
4 – a back tube;
5 – the gauge of the index of level and a fuel reserve;
6 – a stopper of a fuel tank;
7 – a tube of ventilation of a fuel tank;
8 – a fuel tank;
9 – linings;
10 – a collar of fastening of a fuel tank;
11 – a forward tube

Removal and installation

1. Cнимите a wire "weight" of the storage battery.
2. Turn away a stopper 6 bulk pipes, a drain stopper and merge gasoline (on cars since 1985 of release the drain stopper is absent).
3. Remove a guard of a fuel tank.
4. Disconnect wires of weight, the index of level and a fuel reserve.
5. Disconnect hoses of giving of fuel and ventilation of a fuel tank.
6. Turn away a bolt of a collar 10 and remove a fuel tank.
7. Installation of a fuel tank spend upside-down.

Clearing and the control

1. Remove from a tank the gauge of level of fuel. For removal of pollution and adjournment wash out a tank gasoline. Then wash out a tank a stream of hot water and пропарьте for removal of the rests of gasoline.
2. Carefully examine a tank in the area of a joint and be convinced of absence of a leak. The found out places of a leak on a joint solder soft solder.

The prevention

It is possible to solder only well washed out and пропаренный a tank which is not containing steams of gasoline that there was no ignition and explosion at a ration.

«The previous page
4.1.3. The fuel pump
The following page»
4.2. The carburettor