VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
9.1. Features of the device
9.2. Survey, check and steering adjustment
9.2.1. The general survey
9.2.2. Check and backlash adjustment in bearings of a worm of the steering mechanism
9.2.3. Check and backlash adjustment in gearing of a roller with a worm
9.3. The steering mechanism
9.4. Draughts and spherical hinges of a steering drive
9.5. An arm of the pendular lever
9.6. Possible malfunctions of a steering
10. Brake system
11. An electric equipment
12. A body
13. Features of repair
14. Appendices


7b94d386







9-2-3-proverka-i-regulirovka-zazora-v-zaceplenii-rolika-s-chervyakom.html

9.2.3. Check and backlash adjustment in gearing of a roller with a worm

PERFORMANCE ORDER
1. Having convinced that there is no axial moving of a worm to bearings, stripper А.47035 выпрессуйте fingers of spherical hinges from apertures in сошке and disconnect draughts from сошки, keeping thus rectilinear position of forward wheels.
2. Shaking сошку for a head, check up, whether there is no backlash in roller and worm gearing. Within steering wheel turn on 30 ° in each party from neutral position of a backlash, i.e. a notable free wheeling сошки, should not be.
3. If the free wheeling сошки, ослабьте a nut 3 is felt (fig. the Cut картера the steering mechanism) the adjusting screw see and, having raised a lock washer, turn the adjusting screw 2 before backlash elimination. The adjusting screw too do not tighten.
4. The adjusting screw too do not tighten.
5. Having convinced that сошка does not move, connect to it fingers of spherical hinges.
6. Check up effort of turn of a steering wheel. If it exceeds 245 Н (25 кгс), ослабьте the adjusting screw 2.

«The previous page
9.2.2. Check and backlash adjustment in bearings of a worm of the steering mechanism
The following page»
9.3. The steering mechanism