|
5-3-4-vyklyuchatel-zazhiganiya.html
5.3.4. The ignition switchThe ignition switch
|
1 – запорный a core;
2 – the case of the switch of ignition;
3 – the platen;
4 – a contact disk;
|
5 – the contact plug;
6 – колодка;
And – a wide ledge of a contact part |
At the ignition switch work of the antijoy ride device and correctness of short circuit of contacts is checked at various positions of a key (the tab. Switching of plugs of the switch of ignition see). Pressure from the storage battery and the generator is brought to contacts of "30" and «30/1». Free tip "INT" serves for radio receiver connection.
The zapornyj core of the antijoy ride device should be put forward, if to establish a key in position III (parking) and to take out from the lock. The zapornyj core should утапливаться after turn of a key from position III in position 0 (is switched off). The key should be taken out from the lock only in position III.
At installation of a contact part in the case of its switch it is necessary to have so that tips «15» and «30» were from outside запорного a core 1 (fig. the ignition Switch), thus a wide ledge see "and" a contact part will enter into a wide groove of the case of the switch of ignition.
Switching of plugs of the switch of ignition
|
Key position
|
Contacts однапряжением
|
Included chains
|
|
0 It (is switched off)
|
30 and 30/1
|
–
|
|
I (Ignition)
|
30–INT
|
External illumination. A cleaner and a windscreen washer. A heater |
|
30/1–15
|
Winding of excitation of the generator. Ignition system. Turn indexes. Control devices. Backing light |
|
II (Starter)
|
30–INT
|
Position I see
|
|
30/1–15
|
Position I see
|
|
30–50
|
Starter
|
|
III (Parking)
|
30–INT
|
Position I see
|
| 