VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
11. An electric equipment
12. A body
12.1. Features of the device
12.2. Repair of a skeleton of a body
12.3. Paint and varnish coverings
12.4. Anticorrosive protection of a body
12.5. Doors
12.6. A cowl, a luggage carrier cover, bumpers
12.6.1. Removal and cowl installation
12.6.2. Removal and installation of a cover of a luggage carrier
12.6.3. Removal and installation of bumpers
12.7. Osteklenie bodies and a windscreen washer
12.8. The panel of devices
12.9. Seats
12.10. A heater
12.11. Possible malfunctions of a body, their reason and elimination methods
13. Features of repair
14. Appendices


7b94d386







12-6-kapot-kryshka-bagazhnika-bampery.html

12.6. A cowl, a luggage carrier cover, bumpers

Cowl removal

1 – a cowl;

2 – a cowl emphasis;

3 – a bolt of fastening of a loop of a cowl;

4 – a loop


The cowl 1 is hung on a body on a first line and locked by the lock. A drive of the lock of a cowl тросовый, the handle is located in a body, on the left side, under the panel of devices. The cowl is kept in open position by an emphasis 2.

PERFORMANCE ORDER
1. To remove a cowl, disconnect an emphasis and turn away bolts of fastening of loops to a cowl.
2. Installation spend upside-down. Before a definitive tightening of bolts of fastening of loops of a cowl adjust cowl position that it settled down in an aperture of a body with identical backlashes. For adjustment the increased apertures in cowl loops are provided.

The cowl lock

1 – the lock case;
2 – a spring;
3 – a pusher;
4 – a hook;
5 – draught of a drive;
6 – the drive handle

If the lock unreliably locks a cowl or to close and open a cowl difficultly, it is required to adjust lock position, for this purpose at an open cowl:

 – Outline contours of the case of 1 lock and ослабьте fastening nuts;
 – Move the lock in the necessary position, tighten nuts of fastening and check up lock installation.
«The previous page
12.5.7. Adjustment стеклоподъемника
The following page»
12.6.1. Removal and cowl installation