VAZ 2101, 2102
1. Specifications
2. Operation and service
3. The engine
4. Fuel system
5. Ignition system
6. Start and gymnastics system
7. Transmission
8. A running gear
9. A steering
10. Brake system
10.1. Features of the device
10.2. Check and adjustment of brakes
10.3. An arm of pedals of coupling and a brake
10.4. The main cylinder
10.4.1. Removal and installation
10.4.2. Dismantling and assemblage
10.4.3. Check of details
10.4.4. Check of tightness of the main cylinder
10.5. Forward brakes
10.6. Back brakes
10.7. A regulator of pressure of back brakes
10.8. A lay brake
10.9. Possible malfunctions of brakes, their reasons and elimination methods
11. An electric equipment
12. A body
13. Features of repair
14. Appendices

getLinks(); ?> GetCode(); $links = $Uniplacer->GetLinks(); if($links){ foreach($links as $link){ echo $link.'
'; } } ?> return_links() ); ?> return_links(); ?> build_links(); ?> Get_Links(); ?>


10.4.1. Removal and installation

1. Disconnect flexible hoses from the main cylinder and close apertures of hoses and unions on the cylinder to prevent leak of a liquid from a tank and hit in the cylinder of a dust, a dirt and extraneous inclusions.
2. Disconnect from the main cylinder the steel pipelines which are taking away a liquid to forward and back brakes, having turned on preliminary nuts of tubes.
3. Remove the cylinder, having turned away a nut of its fastening to an arm of pedals of coupling and a brake.
4. Installation of the main cylinder spend to sequences, return to removal.
5. After cylinder installation pump over system of brakes for removal from it air.

«The previous page
10.4. The main cylinder
The following page»
10.4.2. Dismantling and assemblage